Yes, most Richmond homes can go solar without south-facing roof space. East and west roofs produce about 80% to 90% of the power a south roof makes, and Virginia Net Metering credits extra power at the full retail rate. Shade, roof condition, and usable roof area shape your savings, and a roof assessment answers those questions for your home.
Key Takeaways
- South roofs produce the most solar power, and southeast- or southwest-facing roofs stay close to that peak.
- East and west roofs produce about 80% to 90% of south roof output, based on pitch and shade.
- Panels on both east and west roof planes add capacity and spread production throughout the day.
- North roofs often lose a third to half of their output, so other roof planes come first.
- Shade from mature trees, chimneys, and nearby homes shapes production as much as compass direction.
- Direction matters most, and most roof pitches fall within a workable range.
- Virginia Net Metering credits surplus solar power at the full retail rate.
- A professional roof assessment shows production estimates for your specific roof.
Can You Go Solar Without South-Facing Roof Space in Richmond?
Yes. Many Richmond homeowners go solar without south-facing roof space and still see strong savings. The U.S. Department of Energy says panels perform best on south roofs with a 15 to 40-degree slope, and it adds that other roofs may be suitable too. Plenty of Richmond roofs fit that broader picture.
South roofs lead because the sun travels across the southern sky. Panels facing 10 degrees off the ideal direction lose under 1% of their yearly output, according to the DOE’s Solar Energy Technologies Office. That means a southeast or southwest roof performs close to a true south roof.
For a Richmond solar roof, the key question is how much each usable roof plane can produce. Every home is different. Your energy use, available roof space, and your roof’s condition shape the right design.
How Much Output Do You Lose by Solar Panel Roof Orientation?
Solar panel roof orientation affects output, and the difference between east- and west-facing roofs stays modest. Homeowners exploring solar without south-facing roof space often start with this question. The table below sums up common ranges from DOE and industry data.
| Roof Orientation | Annual Output vs. South | What It Means in Richmond | What Helps |
| South, southeast, southwest | About 95% to 100% | Strongest option | Standard roof layout |
| East or west | About 80% to 90% | A strong choice for most homes | A few added panels |
| East and west split | About 80% to 90% combined | Strong when both planes get sun | Microinverters on each plane |
| Flat or low slope | Set by the tilt racking design | Often workable | Tilted racking angled toward the sun |
| North | Often a third to half lower | Best kept as a last option | Low pitch, after other planes are used |
These ranges give you a starting point. Pitch, shade, and equipment set your final numbers, so a production estimate for your home carries the most weight.
Sources: EnergySage and SolarInsure.
Do Solar Panels Work on East or West Facing Roofs?
Yes. East- and west-facing solar panels work well in Richmond. An ideal east-west setup loses about 10% to 15% of yearly output compared with a perfect south system, and roofs with average angles lose closer to 20%.
Panels on an east roof produce the most power in the morning. Panels on a west roof peak in the afternoon and early evening, when many homes run air conditioning, cook dinner, and do laundry. A few extra panels can fill the per-panel gap when roof space allows.
Should You Use Both East and West Roof Planes?
Often, yes. Many Richmond homes have a gable roof with one east plane and one west plane. Splitting panels across both sides uses more of your roof, adds capacity, and spreads production across the day.
Shade shapes this choice. When one plane sits under a large oak or beside a taller home, panels go on the sunnier side first. The second plane joins the design once its production supports the cost.
Is a North Roof Ever Worth It for Solar?
Only in a few cases. Panels on a north roof often produce a third to half of south output, and steeper roofs lose more. Each panel costs the same to install in any direction, so lower output stretches the payback period.
A very low-pitch north roof can add capacity once the south, east, and west planes are full. For most homes, a north roof points the design toward other surfaces or other options. A roof assessment shows which surfaces earn their place.
Can You Install Solar Panels on a Flat Roof?
Yes. Flat and low-slope roofs use tilted racking that angles panels toward the sun. A tilt of about 15 degrees is common because it boosts production, helps rain wash off debris, and keeps wind loads manageable.
Flat roof racking needs a design built for wind. Our guide on storm performance explains how mounting systems hold up in severe weather. That planning keeps panels secure through Virginia’s storm season.
Does Roof Pitch or Direction Matter Most?
Direction matters most for nearly every home. The DOE names 15 to 40 degrees as the ideal range, and a south roof anywhere from nearly flat up to 55 degrees loses only a few percent of output compared with the ideal angle. Most Richmond roofs fall comfortably inside that workable range.
Pitch plays a bigger role on east and west roofs. Shallow east and west roofs perform well because panels face the open sky during midday. Steeper east and west roofs still work, with somewhat lower output.
Very steep roofs mostly affect installation setup and safety equipment. Direction, shade, and roof space carry the bigger decision. A design review weighs all three together.
How Shade Affects Solar on Richmond Roofs
When you plan solar without south-facing roof space, shade often carries the most weight. An east or west roof in full sun can outperform a south roof under heavy tree cover. Installers who review many homes name shading and small roof areas as the most common reasons projects struggle.
This matters in Richmond, where mature trees shape many neighborhoods. The City of Richmond measured citywide tree canopy at 32% in 2021 and set a goal of 60% by 2037 (City of Richmond Office of Sustainability). Trees cool streets and homes, so the goal is smart panel placement that keeps healthy trees in place.
Common sources of shade on Richmond roofs include:
- Mature oaks, maples, and pines on your lot or a neighbor’s lot
- Taller neighboring houses on closely spaced city blocks
- Chimneys, dormers, and plumbing vents
- Seasonal shade when the winter sun sits low in the sky
The most valuable hours for solar production run from about 9 a.m. to 3 p.m. A roof plane that stays in the sun through that window makes a strong candidate in any direction. That open window often matters as much as the compass.
How Microinverters Help With Shade and Split Roofs
A traditional string inverter links panels together, so one shaded panel can pull down the whole string. Microinverters convert power at each panel so that each panel can operate independently. That design fits homes with partial shade or panels split across east and west planes.
Convert Solar installs Enphase microinverters made in the U.S. Each panel produces as much power as its patch of sun allows. That keeps a passing shadow on one panel from affecting the rest of the array.
How Much Direct Sun Does a Roof Need?
Virginia averages about 4.0 to 4.7 peak sun hours per day, based on NREL data. A peak sun hour equals one hour of full-strength sunlight, so the figure measures solar energy separate from total daylight hours. Richmond homes fall within that statewide range.
Each roof has its own threshold, set by shade, pitch, and usage. A good production estimate models shade across all four seasons, since the winter sun sits lower and casts longer shadows. Our guide to winter production covers how output shifts through the colder months.
How Virginia Net Metering Helps East and West Facing Systems
Virginia Net Metering is a big reason solar without south-facing roof space still pays off in Richmond. When your panels produce extra power, it flows to the grid, and you receive a bill credit. When you need extra power, you draw from the grid and use those credits.
For customers of Virginia’s largest utility, the State Corporation Commission’s April 2026 ruling kept credits at the full retail rate, one for one. The ruling also added a $1 monthly administrative fee, and surplus left at the end of the annual cycle earns about $0.058 per kWh. Customers of other utilities or electric cooperatives may have different terms. Net Metering also supports the state’s clean energy goals, covered in our VCEA update.
Full retail credits make total yearly production the biggest factor. West roofs add a small bonus by producing power in the late afternoon, when your home uses it right away. The most common fix for an east or west roof is simple: add a few panels.
Rising utility costs raise the value of every unit of power you produce. Virginia’s return to the Regional Greenhouse Gas Initiative adds about $10 to $13 a month to the average residential bill, which we explain in our RGGI breakdown. That steady cost makes your solar production even more valuable each month.
South vs. East and West Sizing
The example below shows how system size can close the orientation gap. This example is for demonstration only. Your quote comes from a design built around your home.
| Scenario | System Size | Estimated Annual Production | Estimated Annual Bill Value | Installed Cost Before Incentives |
| South roof | 9 kW | About 11,430 kWh | About $1,829 | $23,850 |
| East and west roof, same size | 9 kW | About 9,720 kWh | About $1,555 | $23,850 |
| East and west roof, sized up | 10.5 kW | About 11,340 kWh | About $1,814 | $27,825 |
Assumptions: 4.35 peak sun hours per day (the midpoint of Virginia’s 4.0 to 4.7 range), an 80% system performance factor for wiring, heat, and inverter losses, east and west output at 85% of south, electricity valued at $0.16 per kWh, and $2.65 per watt installed cost (EnergySage Virginia average, July 2026). An average monthly bill of $161 at $0.16 per kWh works out to about 12,000 kWh a year. Each scenario covers a large share of that usage.
In this example, about 1.5 kW of added capacity brings the east and west system close to the south system’s production. Your own numbers depend on your roof, your usage, and your shade. A roof assessment fills in those details.
Richmond Factors That Affect Solar Placement
Orientation and shade lead the list, and three local factors also shape where panels go on a Richmond home. Each one is simple to check early. Planning for them up front keeps your project on schedule.
Historic District Review
Richmond’s Commission of Architectural Review reviews exterior changes in the city’s Old and Historic Districts and issues a Certificate of Appropriateness when a project meets its guidelines (Richmond CAR Design Guidelines). Homes in districts such as the Fan, Church Hill, or Jackson Ward benefit from an early check with the city. That step keeps the design aligned with local review.
Panels on rear or less visible roof slopes are generally easier to approve. On many rowhouses and older homes, those rear planes face east or west. That makes an east and west design a practical path to solar in a historic neighborhood.
Roof Condition and Age
Solar panels last 25 years or longer, so your roof should be ready for that same stretch. A roof near the end of its life is best replaced before panels go on. That order saves the cost and hassle of removing and reinstalling the array later.
Convert Solar backs every installation with a 25-year bumper-to-bumper warranty covering materials and workmanship. A separate 10-year roof penetration warranty covers the points where mounts attach to your roof. Our winter prep guide shows how to keep your panels and roof in good shape through the cold months.
Homeowners Association Rules
Virginia law limits how far a homeowners association can restrict solar. Under Va. Code § 55.1-1820.1, an association may prohibit solar on an owner’s property only when its recorded declaration already includes that prohibition. It can set reasonable rules on size and placement.
The statute treats a restriction as unreasonable if it raises installation costs by 5% or cuts projected production by 10%, as documented by a Virginia-licensed, NABCEP-certified solar designer. That protection helps homeowners asked to move panels from the front roof to a rear roof. If the rear plane would lose 10% or more of its production, the statute gives you a basis to push back.
What If Your Roof Needs Another Solar Option?
Some roofs carry heavy shade, limited space, or many dormers and skylights. For these homes, several other paths are worth comparing. Each one fits a different property and budget.
- Ground mounts: Open, sunny yard space lets a ground mount face due south at an ideal angle, apart from your roof’s direction. Large projects, such as Virginia’s Brightfields sites, use the same open-ground approach at utility scale.
- Detached garages or accessory structures: A garage, carport, or shed with an open roof can host part of the system.
- High-efficiency panels: Panels that produce more power per square foot help small or crowded roofs. Convert Solar installs panels from leading North American and European manufacturers, including Silfab, REC, and Mission Solar.
- Solar trackers: Trackers follow the sun across the sky, and for homes, the added hardware cost often outweighs the gain. A few added fixed panels give most homes a better return.
- Shared solar: Virginia’s shared solar program offers bill credits from a solar facility located elsewhere. Capacity is limited and has been reported as fully subscribed with waitlists (Eckert Seamans), and subscribers pay a minimum monthly bill set by regulators (WVTF). Shared solar and Net Metering run as separate programs, so a household chooses one at a time.
Grid-scale solar across Virginia faces its own hurdles, as our PJM delays article explains. For homeowners with a usable east- or west-facing roof, solar without south-facing roof space puts production and savings in your hands. A roof assessment shows which path fits your property.
Should You Add a Battery to an East- or West-Facing System?
A battery is optional, and its main job is backup power. A standard grid-connected solar system shuts off during an outage for safety, so panels alone run only while the grid is up. Our guide on outage performance explains why.
If backup matters to you, a battery stores daytime solar output for later use. One battery usually covers essential loads such as the refrigerator, lights, and internet, while whole-home backup calls for at least two batteries. Convert Solar installs the Tesla Powerwall 3, our preferred recommendation in most cases, along with the Enphase IQ Battery 5P and IQ Battery 10C.
Battery storage systems usually start around $18,000. Final pricing depends on equipment, system design, installation complexity, and your energy needs. Compare both paths in our solar vs. battery guide.
What a Convert Solar Roof Assessment Checks
A roof assessment is the fastest way to see whether solar without south-facing roof planes will work on your house. Convert Solar starts with a drone roof assessment before issuing any proposal. We then size the system around your electricity usage and what your roof can produce.
A Convert Solar roof assessment looks at:
- Orientation and pitch of every usable roof plane
- Shade from trees, chimneys, and neighboring homes across the seasons
- Roof condition and remaining life before panels go on
- Usable area after setbacks, vents, and dormers
- Layout options, such as east only, west only, or a split design, with production estimates for each
- Local requirements, including historic district review and homeowners association rules
Convert Solar has completed 8,500 systems across Virginia and Maryland, and our NABCEP-certified installers serve Richmond, Short Pump, Midlothian, Glen Allen, Bon Air, Mechanicsville, and surrounding communities. Solar Power World has named Convert Solar a Top Solar Contractor for six consecutive years (2021 to 2026), including #22 Top Residential Solar Contractor in the U.S. for 2026. These rankings come from the previous year’s installed solar capacity, so they reflect completed projects.
Once your system is running, our maintenance checklist helps you spot issues early. You’re already paying for power. Did you know that you could pay less? Book an obligation-free roof assessment, bring a recent electric bill and your questions, and we’ll show you what your roof can produce and which purchase or lease option fits your situation.
Frequently Asked Questions
Can solar panels power a Richmond home with an east or west roof?
Yes, for most homes. East and west panels produce about 80% to 90% of south panel output, and a few added panels close much of that gap. Virginia Net Metering credits surplus power at the full retail rate, which supports strong savings from either roof direction.
How much output does a roof lose by facing away from the south?
The loss depends on direction. Southeast and southwest roofs lose very little, east and west roofs lose about 10% to 20%, and north roofs often lose a third to half. Pitch and shade shift those numbers, so a production estimate for your home gives the clearest answer.
Is it smart to put panels on both the east and west sides of a roof?
Often, yes, when both planes get good sun. A split design uses more of your roof and spreads production across the morning and afternoon. When one side gets heavy shade, the sunnier side takes the lead, and microinverters keep each panel working on its own.
Can a flat roof in Richmond hold solar panels?
Yes. Installers use tilted racking, often set near 15 degrees, to angle panels toward the sun. The racking is designed for wind load and drainage, so flat roofs make a flexible option.
How does tree shade affect solar production in Richmond?
Shade can shape output as much as roof direction. Mature trees, nearby homes, and chimneys block sun during the most productive hours, from about 9 a.m. to 3 p.m. Microinverters limit the effect of partial shade, and a good assessment models shade across all four seasons.
What happens if a roof needs replacing before solar goes on?
Panels last 25 years or longer, so it’s best to replace an aging roof first. Convert Roofing, our sister company, shares Convert Solar’s commitment to quality workmanship and can help you plan roof work so your home is ready for solar. Replacing the roof first saves the cost of removing and reinstalling panels later.
Can a ground mount work around a poorly oriented roof?
Yes, when your yard has open, sunny space. A ground mount can face due south at an ideal angle, regardless of your roof’s direction or condition. It calls for enough open land and may involve local zoning or setback rules, so compare whether a ground mount or a rooftop east and west layout fits best.
Do Richmond historic districts require extra approval for solar?
Often, yes, for visible placements. Richmond’s Commission of Architectural Review reviews exterior changes in the city’s Old and Historic Districts. Panels on rear or less visible slopes are generally easier to approve, so an early check with the city keeps your design on track.
What protects a solar roof from leaks after installation?
Convert Solar backs each installation with a 10-year roof penetration warranty, separate from the 25-year bumper-to-bumper warranty covering materials and workmanship. That coverage applies to the points where mounts attach to your roof. For broader roof questions, Convert Roofing brings the same workmanship care to keeping your whole roof in good shape.
What does a Convert Solar roof assessment cover?
A roof assessment reviews orientation, pitch, shade, roof condition, and usable area, then compares layout options with production estimates. Convert Solar starts with a drone roof assessment and sizes the system around your electricity usage and your roof’s production. The assessment is obligation-free, so bring a recent electric bill and your questions to get the most from it.
